Abtex Corporation | A Deburring Technology Company
All Categories > Deburring Systems > Fine Blanked and Stamping Deburring Systems > Tri-Ten 3 Head Deburring System For Fine Blanked Parts > View Items  

Tri-Ten 3 Head Deburring System For Fine Blanked Parts

Check up to five results to perform an action.

  • This system is capable of deburring single side of a fine blanked part in a single pass using 3- planetary heads.
  • Three custom designed 254mm flap discs on the first head remove the primary stamping burr.
  • Six 254mm, application-specific abrasive filament brushes on the second and third heads eliminate secondary burrs and provide the specified edge radius.

  • The three planetary head system removes the burrs on parts ranging from 3mm thick to 0.40mm. 
  • This results in an annual throughput of more than 15 million parts.
  • The machine can be either bulk fed (operator or robot) or fed directly by the upstream press.

  • The system also communicates with the upstream press, centralized coolant system and downstream conveyors to ensure safe, efficient and effective part processing.
  • Coolant is liberally applied during the deburring operation to ensure part cleanliness and extend media life. 
  • Gap conveyor smoothly transfers parts to a heavy rinse station and demagnetization and blow-off bays that efficiently remove any residual debris/particulate.





    Download PDF Download PDF   
    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  

 DOWNLOADS 

Capabilities Brochure
(PDF, 1352KB)

Fine Blanked Sales Sheet
(PDF, 2760KB)